Soil resistances for laterally loaded rigid piles in multi-layered elastic soil     

Bipin K. Gupta 《Geomechanics and Geoengineering》2020,15(1):10-28

ABSTRACT

Short stubby piles like monopiles and large diameter drilled shafts undergo rigid body translation and rotation when subjected to a lateral force and/or a moment at the head. A method of analysis for these piles embedded in multi-layered elastic soil is developed using the variational principles of mechanics. Using this analysis, the soil resistance against pile movement can be rigorously related to the soil elastic constants, and the pile head displacement and rotation can be quickly calculated. The equilibrium equations for pile and soil displacements are obtained using the principle of virtual work and solved using an iterative algorithm. Pile responses obtained from the analysis match well with those obtained from three-dimensional finite element analyses in which the same inputs of loads, geometry, and material properties are given. Based on the new analysis, fitted equations for soil resistance parameters are developed, which can be used to directly calculate the pile head displacement and rotation without the use of the iterative algorithm. Numerical examples are provided that demonstrate how the method can be used to analyse practical problems.  相似文献   

臭氧及臭氧类高级氧化技术降解甲基对硫磷的效能          下载免费PDF全文

林存旺  许珊珊  项丰云  章小芳 《海洋开发与管理》2018,35(9):94-99

文章研究了臭氧及臭氧类高级氧化技术(AOPs-O3)在不同pH条件下降解甲基对硫磷(MP)的效能。结果表明,在pH 3~10的条件下(反应过程控制pH),单独臭氧化5min即可完全降解MP,但不同pH下化学耗氧量(COD)和有机磷的释放率差异明显。在pH为3.3,7.5和9.4的条件下单独臭氧30min后COD的去除率分别为55.17%,89.64%和93.10%,有机磷的释放率分别为16.33%,95.00%和99.99%。考虑酸性条件下可以规避碳酸盐的负面影响(特别是高浓度废水),利用O3/H2O2/Ti(IV)在pH 3.3条件下处理MP溶液,COD去除率和有机磷释放率分别达到89.64%和81.57%。相对法计算求得MP与O3和羟基自由基(·OH)的速率常数分别为31.98L·(mol·s)-1和7.488×109 L·(mol·s)-1。活性污泥法的测试结果表明,MP经O3/Ti(IV)/H2O2(pH=3.3)和O3(pH=9.4)可提升含MP废水的可生化性,但与培养液体系相比仍具有一定的毒性。  相似文献   

Risk Analysis of Breakwater Caisson Under Wave Attack Using Load Surface Approximation     

Dong Hyawn KIM 《中国海洋工程》2014,(6):739-748

A new load surface based approach to the reliability analysis of caisson-type breakwater is proposed. Uncertainties of the horizontal and vertical wave loads acting on breakwater are considered by using the so-called load surfaces, which can be estimated as functions of wave height, water level, and so on. Then, the first-order reliability method（FORM） can be applied to determine the probability of failure under the wave action. In this way, the reliability analysis of breakwaters with uncertainties both in wave height and in water level is possible. Moreover, the uncertainty in wave breaking can be taken into account by considering a random variable for wave height ratio which relates the significant wave height to the maximum wave height. The proposed approach is applied numerically to the reliability analysis of caisson breakwater under wave attack that may undergo partial or full wave breaking.  相似文献   

潮致泥沙全沙净输运解析模式     

储鏖  徐怡  陈永平  郁夏琰  王彪 《海洋工程》2020,38(4):61-72

泥沙运动作为水流和底床相互作用的纽带,是河流、河口及海岸工程研究的重要内容。在潮波作用明显的河口、海岸地区,周期性的动力作用下的泥沙运动具有往复和可逆的特征,因此研究这类水域的泥沙的净输运更具有实际的意义。基于泥沙输运和流速呈指数关系假设,建立潮流环境下的泥沙全沙净输运的解析解公式,并对该公式的计算结果和数值计算以及数学模型的结果进行了检验和验证,结果表明本研究提出的公式能较好地反应潮流环境下的泥沙净输运。由此,基于本公式采用潮流分潮调和常数可计算得到全沙净输运,并可以分析各分潮流及其相互作用与泥沙净输运的关系。研究结果显示,在受径流影响较大的半日潮河口,S2、MS4、M2三潮相互作用对全沙净输运的贡献显著高于通常的潮流不对称作用,即M2、M4的相互作用。此外,河口区域径流导致的余流对泥沙净输运的贡献不可忽略,特别是在洪季,大径流量条件下往往导致余流较大,其对泥沙净输运的贡献所占比例较大。  相似文献   

钢管脐带缆扭转平衡设计     

牛学超  祝庆斌  潘盼  邵鹏进  胡明  谢书鸿 《海洋工程》2020,38(6):151-157

钢管脐带缆包含多种螺旋缠绕的功能单元，其在外力载荷下会发生相对运动，而且钢管的刚度较大对扭转平衡有重要影响，因此，相对于普通电缆，钢管脐带缆在扭转平衡设计时更加困难。根据扭转平衡理论公式，采用控制变量法，以第二层铠装钢丝的绞合角度为变量进行扭转平衡设计。首先建立脐带缆缆芯有限元模型，对其施加拉伸载荷，结果显示缆芯出现了扭转，这证明不能将脐带缆缆芯视为一实心圆柱。其次建立不同绞合角度的脐带缆有限元模型，设置各功能单元的材料属性和摩擦系数，分析模型在拉伸载荷下的扭转角度，并将相同拉伸载荷下的扭转角度拟合为直线，从而得到钢管脐带缆在扭转平衡状态时的最优绞合角度。最后，采用试验方法对实物钢管脐带缆进行扭转平衡测试，测试结果显示在拉伸载荷下脐带缆单位长度扭转角度十分微小，这表明缆是扭转平衡的。因此验证了使用的有限元方法在钢管脐带缆扭转平衡设计中的有效性。  相似文献   

Dynamic responses of unsaturated half‐space soil to a moving harmonic rectangular load          下载免费PDF全文

Zheng Lu  Ran Fang  Hailin Yao  Cheng Dong  Shaohua Xian 《国际地质力学数值与分析法杂志》2018,42(9):1057-1077

The problem of the dynamic responses of a semi‐infinite unsaturated poroelastic medium subjected to a moving rectangular load is investigated analytical/numerically. The dynamic governing equations are obtained with consideration of the compressibility of solid grain and pore fluid, inertial coupling, and viscous drag as well as capillary pressure in the unsaturated soil, and they can be easily degraded to the complete Biot's theory. Using the Fourier transform, the general solution for the equations is derived in the transformed domain, and then a corresponding boundary value problem is formulated. By introducing fast Fourier transform algorithm, the unsaturated soil vertical displacements, effective stresses, and pore pressures induced by moving load are computed, and some of the calculated results are compared with those for the degenerated solution of saturated soils and confirmed. The influences of the saturation, the load speed, and excitation frequency on the response of the unsaturated half‐space soil are investigated. The numerical results reveal that the effects of these parameters on the dynamic response of the unsaturated soil are significant.  相似文献   

Response of hybrid isolation system during a shake table experiment of a full‐scale isolated building     

Keri L. Ryan  Taichiro Okazaki  Camila B. Coria  Eiji Sato  Tomohiro Sasaki 《地震工程与结构动力学》2018,47(11):2214-2232

A full‐scale 5‐story steel moment frame building was subjected to a series of earthquake excitations using the E‐Defense shake table in August, 2011. For one of the test configurations, the building was seismically isolated by a hybrid system of lead‐rubber bearings and low friction roller bearings known as cross‐linear bearings, and was designed for a very rare 100 000‐year return period earthquake at a Central and Eastern US soil site. The building was subject to 15 trials including sinusoidal input, recorded motions and simulated earthquakes, 2D and 3D input, and a range of intensities including some beyond the design basis level. The experimental program was one of the first system‐level full‐scale validations of seismic isolation and the first known full‐scale experiment of a hybrid isolation system incorporating lead‐rubber and low friction bearings. Stable response of the hybrid isolation system was demonstrated at displacement demands up to 550 mm and shear strain in excess of 200%. Torsional amplifications were within the new factor stipulated by the code provisions. Axial force was observed to transfer from the lead‐rubber bearings to the cross‐linear bearings at large displacements, and the force transfer at large displacements exceeded that predicted by basic calculations. The force transfer occurred primarily because of the flexural rigidity of the base diaphragm and the larger vertical stiffness of the cross‐linear bearings relative to the lead‐rubber bearings.  相似文献   

A method for uncertainty constraint of catchment discharge and phosphorus load estimates          下载免费PDF全文

Michael J. Hollaway  Keith J. Beven  Clare Mc W. H. Benskin  Adrian L. Collins  Robert Evans  Peter D. Falloon  Kirsty J. Forber  Kevin M. Hiscock  Ron Kahana  Christopher J. A. Macleod  Mary C. Ockenden  Martha L. Villamizar  Catherine Wearing  Paul J. A. Withers  Jian G. Zhou  Nicholas J. Barber  Philip M. Haygarth 《水文研究》2018,32(17):2779-2787

River discharge and nutrient measurements are subject to aleatory and epistemic uncertainties. In this study, we present a novel method for estimating these uncertainties in colocated discharge and phosphorus (P) measurements. The “voting point”‐based method constrains the derived stage‐discharge rating curve both on the fit to available gaugings and to the catchment water balance. This helps reduce the uncertainty beyond the range of available gaugings and during out of bank situations. In the example presented here, for the top 5% of flows, uncertainties are shown to be 139% using a traditional power law fit, compared with 40% when using our updated “voting point” method. Furthermore, the method is extended to in situ and lab analysed nutrient concentration data pairings, with lower uncertainties (81%) shown for high concentrations (top 5%) than when a traditional regression is applied (102%). Overall, for both discharge and nutrient data, the method presented goes some way to accounting for epistemic uncertainties associated with nonstationary physical characteristics of the monitoring site.  相似文献   

建筑在强震下横拉承压力钢筋负荷测量          下载免费PDF全文

任燕娟 《地震工程学报》2018,40(4):692-697

在强震状态下,建筑物的横拉承压受力较为复杂,另外由于建筑物形状及在地震中受力面积大小不同,在强震下造成碰撞大小影响不一导致其横拉承压力的随机复杂性十分突出。传统的建筑承压负荷检测方法中钢筋负荷受力测量能力不足,检测结果易出现误差。将建筑钢筋的机械性能设为理想弹塑性,利用建筑物横拉承压力钢筋负荷测量方法,对不同结构、不同工况的建筑钢筋载荷的变化规律进行测试分析,结合建筑局部承压特点和整体结构聚力方式,设计横拉承压力钢筋负荷检测方法,并进行仿真实验,结果表明该方法模型所得数据更加精准,有良好的适用性。  相似文献   

Response and capacity of monopod caisson foundation under eccentric lateral loads     

Tanmoy Kumar Deb  Baleshwar Singh 《Marine Georesources & Geotechnology》2018,36(4):452-464

Monopod caisson foundation is a viable alternative for supporting offshore wind turbines located at shallow water depths. This foundation system has to resist overturning moment generated due to resultant lateral load, arising from wind and water wave action, that can act at any loading height above the seabed. This paper presents results of a numerical investigation performed to determine the influence of loading height, caisson geometry and superstructure load on the ultimate lateral capacity, initial stiffness, and soil failure zone of the foundation, when installed in very dense sand. Both the ultimate and serviceable states of the caisson foundation obtained from the analyses are represented in terms of envelopes plotted between lateral load and overturning moment. Simplified expressions, which take into account the influence of caisson geometry, loading height, and soil properties, are also presented to serve as a preliminary base for design of the monopod caisson foundation.  相似文献